Elevate the ambiance of any room with this stunning end table, featuring a faux drawer and a practical lower shelf. This DIY End Table project intertwines functionality with style, resulting in a piece that not only adds to the room’s aesthetics but also provides convenient storage space. Whether you’re a seasoned woodworker or a beginner eager to tackle a new challenge, this guide will walk you through creating a timeless piece of furniture that’s sure to garner compliments from all who see it.
DIY End Table With Fake Drawer And Shelf Project
Tools:
- Table Saw
- Miter Saw
- Router
- Planer
- Jointer
- Drill
- Palm Sander
Materials:
The project details don’t explicitly list materials such as wood types or hardware, but based on the steps provided, you’ll need wood for the legs, top, shelf, drawer, and various other components. Additionally, you’ll require wood glue, L brackets, screws, and a drawer pull.
Creating Your End Table: Step-by-Step Guide
Prepare the Legs
- Begin by cutting the wood pieces for the legs. You might need slightly larger pieces to ensure a 2-inch width post-glue-up.
- Glue the cut pieces in groups of two or three, and set aside to dry.
Assembling Top and Shelf
- While the legs are drying, proceed to cut and glue the pieces for the top and the shelf.
Refining the Legs
- After the glue has set, plane the legs to a 2″x2″ dimension and trim them to a final length of 24 ⅛ inches.
Crafting Other Components
- While waiting for the top and shelf, cut out the side bars, drawer shelf bottom, drawer shelf sides, and back.
Finishing Top and Shelf
- Once released from the clamps, plane and cut the top and shelf to their final dimensions (Top: 14x14x⅞ inches, Shelf: 12x12x¾ inches).
Drawer Assembly Prep
- Cut out the pieces for the drawer including the bottom, sides, and front.
Drawer Side Details
- Machine 45-degree miters on all ends of the drawer sides, plus ½-inch wide and ¼-inch deep rabbets on one edge.
First Drawer Assembly
- Glue up the drawer sides, ensuring all pieces align perfectly.
Carving Shelf Notches
- While the drawer dries, cut 2×2-inch notches on all corners of the shelf for leg fitting.
Adding Rabbets to Drawer Shelf Sides
- Cut ¾-inch wide by ⅜-inch deep rabbets on one edge of the drawer shelf side pieces.
Finalizing Drawer Assembly
- Following the initial assembly, glue the drawer bottom in place, resting it on the previously cut rabbets.
Notching the Drawer Shelf Bottom
- Cut 2″x⅜″ notches in the corners of the drawer shelf bottom for fitting.
Side Bar Adjustments
- Cut notches measuring ¾″ by 5 ¼″ on the side bars for assembly.
Detailing the Drawer Front
- Route a 45-degree chamfer along one side of the drawer front for aesthetic finish.
Completing the Drawer
- After the second assembly phase, attach the drawer front to the pre-assembled box.
Final Touches on Top
- Route a 45-degree chamfer around all edges of the top.
Assembly Steps
Assembling the Table
- The assembly process involves strategic gluing and bracket installation to combine legs, shelf, drawer shelf, and the top for structural integrity.
Finishing Touches
- Once all glued parts have dried, any imperfections and excess glue can be sanded off before applying the finish of your choice to your new, elegantly designed end table.
Congratulations, you’ve now completed your end table with a faux drawer and shelf, ready to add charm and utility to your living space.
Leave a Reply