Transform your living space with a handcrafted centerpiece that not only serves its purpose as a table but also stands as an example to your creativity and DIY Concrete Table Project. This isn’t just any ordinary table, it’s a conversation-starter, a bespoke piece that exudes charm and integrates the timeless Flower of Life design with the raw appeal of concrete, topped off with the glossy sophistication of resin.
DIY Concrete Table Project
Materials List
- Hard foam plate (125 cm x 60 cm x 40 mm)
- Reinforcement steel rods (8mm x 200mm)
- Screed concrete
- Wireframes
- Epoxy resin
- Resin pigments
Tools Used
- CNC machine (such as Shapeoko 2)
- EstlCam software
- Angle grinder
- Old wood plates
- Construction bucket
- Trowel
- Orbital sander
- Double-sided adhesive tape
Step-by-Step Guide
Crafting the Mold
Start by crafting your mold using the CNC machine and EstlCam software. Select the Flower of Life motif and secure the hard foam plate on the milling table with double-sided adhesive tape. Proceed to mill the intricate design into the foam.
Constructing The Base
Using the milled template, outline and cut the steel rods for the table’s base. Weld them together to form stable feet and fix them in place with hot glue.
Assembly of Components
With precision and care, bring together the intricately milled mold, the durably welded feet, and the supporting wire mesh. Ensure alignment for structural integrity.
The Concrete Pour
Before adding the feet into the mold, use a water-filled measuring cup to gauge concrete volume required, then mix and pour the screed concrete. Employ the orbital sander to vibrate and expunge any air bubbles within the mixture. Allow the concrete to solidify before demold.
Liberation From the Mold
The demolding may pose a challenge; future endeavors should include a release agent beforehand. Use spatulas, acetone, and a wire brush attached to a drill to patiently remove the mold residue.
Leg Aesthetics
With a steady hand, apply masking tape to shield the tabletop and proceed to paint the table legs with protective metal paint for a sleek, finished look.
Resin Artistry
Measure out the volume of the milled design, use an epoxy calculator to ascertain the required resin, and level the table. Prepare the epoxy mix with pigment powder, following the manufacturer’s directives, before pouring it into the tabletop design. Allow it to cure completely.
Finishing Touches
Affix a coarse sandpaper to your belt sander and commence the sanding procedure. Progress with finer grits using the orbital sander in a wet sanding method to achieve a reflective, high-gloss finish on the resin surface.
Project Completion
After the final polish, step back and admire the fruits of your labor—a concrete table that’s a true embodiment of artful design and rugged functionality. It’s a concrete declaration of your innovative spirit and attention to detail. Enjoy your one-of-a-kind creation that’s not just a piece of furniture but a story of crafting excellence.
Leave a Reply